Showing posts with label roof repair. Show all posts
Showing posts with label roof repair. Show all posts

Sunday, August 22, 2010

A Guide on Replacing Roof Shingles

When it comes to replacing roof shingles you don’t have to be a professional but there are a few things that you are going to want to be aware of before you get started. Roof cleaning, roof shingles, roof repair, whatever it is, you don’t just want to hop up on a roof before you know what you are doing.

How to do it

So now if you are going to be going through with replacing roof shingles, here is how you are going to do it. First to get started replacing roof shingles you need to do is install a starter strip which is basically just a backing for the first visible row of shingles and which has a main purpose of preventing water from getting through to the roof at the gaps between the shingles.

You can use pre-cut starter strips but you can also trim the tabs off a whole shingle. There are a few different styles and sizes of these shingles that you can choose from and so it really all depends on what sort of roof you are working on which will help determine what supplies you are going to need to go through with replacing roof shingles.

You want to start everything off by cleaning the roof. Your shingles are not going to stick properly if there is a lot of dirt and debris covering the roof so this is one of the first things that you are going to want to take care of. Now you want to start shingling. Loosen the adhesive under the old shingle and remove it, and then put a new shingle in its place to properly go through with replacing roof shingles.

To reseal all the shingles, you want to lift each tab and apply 1” diameter spot of shingle cement under each tab. Repeat the nailing and cement procedure for each one, and remember that you only have to fix the ones that are broken but if you have the money available, and you want to do the best job and have it look the best it can, you may want to do the whole roof over again.

This is probably the best idea anyway if your house is older and has not been reshingled in a while because then you are just going to end up saving yourself time and money down the line by getting the job done now.... Call David Deschaine at 774-9200 or Visit our online showroom at http://www.daviddeschaine.com/

Monday, August 16, 2010

Roof Repair - Get Started With it

Roof Repairs

If you need to get involved with some roof repair, then there are a few really helpful tips that you are going to want to keep in mind. These tips are going to make sure that you get through with the roof repair successfully, because after all it is not the easiest thing in the world. Whether you are working on flat roof repair or angled roof repair, here is some pertinent information.

Gathering Supplies

Before you try working on any roof you want to make sure that you have the proper roof repair supplies on hand. This is important because the last thing that you want is to get all the way up on the roof only to realize that you are missing something that you need. Now there are a few basic pieces of equipment that you almost always need when it comes to roof repair.

A hammer for one, which is almost always necessary, whether you are working on shingles or fixing a hole in the roof, but there are also other equipment and supplies that you will need and which are going to vary depending on what sort of job it is that you are going to be working on.

One of the best tips for roof repair involves chasing leaks. This is one of the most common reasons for problems on roofs and why contractors are called in to work on them. There can be many different reasons for a leak, including that there is a hole in the asphalt shingles, or that there is a hole in the top of the underlayment.

Chasing a leak is not always as easy as it may seem to be, and as most contractors will tell you that they have experienced. When you are working on flat or low-slope roofs, you want to make sure that you inspect any roof drains near the leak area and if you find that they are plugged or draining slowly, then they are probably the reason for the leaks.

It is really going to depend on what sort of roof you are working on and what sort of angle it has to determine what sort of roof repair is going to be needed. Make sure that you are as educated as possible before going up on any roof so that you know what you are doing and are not going to be putting yourself or any other men up there in danger.

http://www.daviddeschaine.com